V BELT PULLEYS AND BRACKETS

ENGINE BRACKETS AND PULLEYS

FRONT RUNNER SERPENTINE BELT SYSTEM

The FrontRunner Serpentine Drive System is so cool that you will never want to close the hood on your Hotrod, Custom, or Classic truck.

Our new FrontRunner Drive System was engineered to convert any small block FORD to the popular and more dependable serpentine belt design. The only design on the market that utilizes a spring-loaded tensioning system for a no-nonsense, trouble free operation. The modular design based on the latest CAD/CAM architecture places all driven components in the tightest possible configuration. Systems are available in two different finishes.

This setup is the best and most complete system money can buy. This kit isn't just brackets and pulleys it also comes with a TIMING COVER, WATER PUMP, A/C COMPRESSOR, 140AMP ALTERNATOR AND SAGINAW POWER STEERING PUMP. With the Stainless Steel 12 point ARP bolts, gaskets, A/C lines and a Gates belt this kit is a great deal.

Shopping Cart
Part Number PART
Price

15-00231
FRONT RUNNER SYSTEM POLISHED
$2399

15-00232
FRONT RUNNER SYSTEM ANODIZED
$2399

SERPENTINE SYSTEM PULLEYS AND BRACKETS

The Serpentine belt system is far superior to v-belt systems there are two great reasons to go to this type of system the first would be because of the spring loaded tensioner the belts always stay tight and don't squeal. The second reason would be that if you want to add or remove power steering or A/C you can by just getting a longer belt, you will not have to change all of the pulleys just to add a new accessory.

This is a good picture of our A/C eliminator this will keep the belt up high enough to allow the tensioner to work correctly.

This oil and acid resistant belt routing sticker is for the 86-89 Ford car type serpentine setup but will work on other systems that are configured the same

Shopping Cart	Part Number	PART	Price
	15-00332	4 TO 3 BOLT CRANK PULLEY ADAPTOR	$59.99
	15-00510	SERPENTINE BELT CRANK PULLEY ALUMINUM	$99.99
	15-00540	SERPENTINE BELT WATER PUMP PULLEY	$29.99
	15-00541	SERPENTINE BELT WATER PUMP PULLEY EXPLORER	$32.99
	15-00520	SERPENTINE BELT ALTERNATOR PULLEY	$15.99
	15-00571	SERPENTINE BELT POWER STEERING PULLEY (FORD PUMP)	$32.99
	15-00572	SERPENTINE BELT POWER STEERING PULLEY (SAGINAW PUMP)	$39.99
	15-00530	IDLER PULLEY	$17.99
	15-00531	BELT TENSIONER	$69.99
	15-00561	A/C ELIMINATOR	$44.99
	15-00101	BELT ROUTING STICKER	$2.99

V BELT PULLEYS AND BRACKETS V8

The Bronco came stock with V-belts they came standard with a single groove and if they came with the power steering option it had two grooves. Some times guys put a 3 groove pulley on, it physically fits on the motor but it requires you to run a bigger fan spacer putting the fan dangerously close to the radiator, We would recommend if you need to run 3 belts it is time to convert to serpentine.

Shopping Cart
Part Number PART
Price

15-00410
V BELT CRANK PULLEY (2 GROOVE)
$69.99

15-00431
V BELT WATER PUMP PULLEY (2 GROOVE) 6.5" DIAMETER
$69.99

15-00432
ALUMINUM V BELT WATER PUMP PULLEY (2 GROOVE) 5-3/8" DIAMETER
$99.99

15-00441
V BELT SANDEN A/C COMPRESSOR CLUTCH (2 GROOVE) DIAMETER
$99.99

15-00422
V BELT ALTERNATOR PULLEY (2 GROOVE) 2.5" DIAMETER
$15.99

15-00420
CHROME V BELT ALTERNATOR PULLEY (2 GROOVE) 2.5" DIAMETER
$24.99

15-00452
V BELT POWER STEERING PULLEY (SAGINAW PUMP) 1 GROOVE
$32.99

15-00453
V BELT POWER STEERING PULLEY (SAGINAW PUMP) 2 GROOVE
$39.99

15-00423 CHROME ALTERNATOR FAN
$14.99

15-00424 CHROME ALTERNATOR BRACKET AND ADJUSTER
$14.99

15-00425 ALTERNATOR SPACER
$2.99

48-14031 MULTI PUMP POWER STEERING A/C BRACKET $99.99

48-14020 POWER STEERING PUMP BRACKET $39.99

48-14021 ADJUSTER BRACKET $29.99

HARMONIC BALANCER

This new 50 oz harmonic balancer is a great setup. With this balancer You have the option to use a 3 bolt or 4 bolt v belt pulley or if you want to upgrade to the 4 bolt serpentine pulley you can, without changing out your balancer. They also added another special feature a removable centering ring so you can use either type of pulley (a pulley with a centering lip or a pulley without a centering lip) Made of nodular iron and has 3 separate timing marks for almost all 5.0 and 351W/5.8 engines.

Shopping Cart
Part Number PART
Price

15-00321 HARMONIC BALANCER 28oz
$ 129.99

15-00311 HARMONIC BALANCER 50oz
$109.99

FLYWHEEL

High quality, all new 28oz flywheel. This flywheel is used on all 302 and 351W engines and uses a 164 tooth ring gear that is drilled for an 11" clutch.

Shopping Cart
Part Number PART
Price

16-00110 302-351W FLYWHEEL 164 TOOTH 28oz
$219.99

16-00010 ALL NEW LUK CLUTCH KIT
$159.99

16-00030 FLYWHEEL BOLT KIT
$10.99

16-00020 11" CLUTCH BOLT AND DOWEL PIN KIT
$13.99

67-55210 CLUTCH FORK BOOT V8
$19.99

67-55300 CLUTCH ROD BOOT V8 $15.99

67-55120 CLUTCH PEDAL BUMPER
$9.99

FLEX PLATE

When looking for a flex plate you need to know three things 1. The diameter of the torque converter you have, they put the 10.5" and the 11" in the Bronco 2. The balance of the engine, there are two 28oz ( 68-80 302) and the 50oz 69-96 351W and 80- 99 302/5.0) 3. The amount of teeth to engage the starter, the correct number of teeth for a Bronco is 164 teeth.

Shopping Cart
Part Number                    PART                               ENGINE SIZE TRANSMISSION TYPE
Price

16-00331 FLEX PLATE 164 TOOTH 289-302-351W C-4 or AOD 28oz
$ 38.99

16-00332 FLEX PLATE 164 TOOTH 1981-01 5.0L C-4 or AOD  50 oz
$64.99

16-00341 FLEX PLAT 164 TOOTH 289-302-351W C-6  28oz
$64.99

16-00342 FLEX PLATE 164 TOOTH 1981-01 5.0L C-6  50 oz
$42.99

16-00310 FLEX PLATE 164 TOOTH FLEX PLATE BOLTS
$7.99

16-00320 FLEX PLATE 164 TOOTH TORQUE CONVERTER NUTS SET OF 4
$.99

PLEASE READ THE FOLLOWING

Before ordering products from B.C. Broncos, please read the following information, including warranty information and statement of liability. By placing an order to purchase products from B.C. Broncos, you are confirming that you have read and agree to our warranty and statement of liability.

WARRANTY POLICY
Within 30 days of receiving a product, if you find the product defective or incorrect, return it to B.C. Broncos. We will repair or replace any product found to be defective, subject to our inspection. Warranty is limited to the cost of the replacement part. Some items purchased from B.C. Broncos and built by other manufacturers may or may not carry warranty's issued by the manufacturer. B.C. Broncos is not a party to such warranty's, and all claims on manufacturer warranty's should be made directly to the manufacturer. No further warranty's are expressed or implied.

RETURNED GOODS POLICY
All items returned to B.C. Broncos which were originally paid for by credit card are subject to a 10% restocking fee.

STATEMENT OF LIMITED LIABILITY
Because B.C. Broncos has no control over the installation and/or other uses of our products, B.C. Broncos will not be held liable for personal, property, legal, or financial damages or claims stemming from the use or misuse of any product we manufacture or sell. The purchaser assumes all responsibility for the safety, proper installation, performance, and applicability of these products. If you have any doubts or concerns about the installation, function, performance or proper use of any of our products, please call our toll free number before proceeding with the installation or use of the product