Often when your miles from nowhere, you need to count on yourself. You need
to have all the tools with you that you can bring.
This tool roll has 23 different size pockets so it will hold lots of
wrenches or screw drivers and it even has a zippered pocket. With the tools
in the picture this tool roll is no more than 2" in diameter. Made of high
quality nylon it features a rubber handle to tote that bag around and Buckle
strap's, No hard to tie knots. Open it measures 14.5" x 30.5" and it's Made
in the USA. Tools sold separately
Shopping Cart
Part Number
PART
Price
92-10010
BLACK TOOL ROLL
$19.95
FOLDING TOOL BAG
This is a great way to organize your tool bag, no more dumping out your tool
bag to find that small tool at the bottom. It has 9 pockets and a large
zippered pouch yet folds up small enough to keep in your main tool bag.
Shopping Cart
Part Number
PART
Price
92-10020
BLACK
$12.95
TRI-FOLD
TOOLBAR
This little bag is about the size of a shaving kit, it folds
out into three sections and has four separate zippered pockets and a
carrying handle it measures about 12" X 18" X 3"
Tools not included
Shopping Cart
Part Number
PART
Price
92-10030
BLACK
$12.95
DELUXE TRAIL BAG
What better way to hold tools, maps , spare parts or other necessities than
a hand made tool bag by Beard Seats? Strong vinyl construction is combined
with heavy-duty stitching large full-strength zippers and rubberized
carrying handle to survive the harshest conditions. This bag also comes with
mounting straps that bolt to the body with footman loops and then the Velcro
straps slip through the straps on the bag.
Available in black, blue and red.
Shopping Cart
Part Number
PART
Price
92-10042
BLACK
$69.99
TOOL TRAY
Are you tired of your tools and supplies getting lost or messed up because
they slide around the back of your Bronco. Here is a great way to keep that
from happening. These tool trays bolt in and hold lots of stuff from tool
bags to drive shafts and tow straps. Chuck keeps a drive shaft on one side
and a tool bag and roll of carpet in the other.
Shopping Cart
Part Number
PART
Price
75-00071
TOOL TRAY
$35.99
75-00070
TOOL TRAY PAIR
$69.99
ANTENNA
MOUNT
Are you looking for a good place to mount your CB antenna well now all you
need is a little bit of round tubing like a roll cage a tube bumper a ice
chest or roof rack. We have many different mounting rings that can be used
on 1" to 2.5" tube
Antenna not included
All Fourtreks Modular
Mounting components are precision-machined from T-6061 aluminum for light
weight yet high strength. The system is made up of two basic components; a
clamp ring and an adapter. The clamp ring is precisely machined to clamp
around your exact roll bar diameter. They manufacture clamp rings for 1",
1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll
bars. The two-piece clamp ring bolts around your roll bar using stainless
steel hardware. The second component is the adapter. The adapter bolts onto
either side of the clamp ring allowing two adapters to be mounted to the
same clamp ring, if desired. The adapters are designed to hold a Four
Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks,
fire extinguishers, cameras, camcorders roof racks load bars and grab bar
handles for your passengers. Fourtreks offers all of the adapters in a
kit form with clamp rings or individual components so that you can mix and
match your own systems. When ordering please let us know what size bar
you will mount it to.
Shopping Cart
Part Number
PART
Price
91-501110
ANTENNA MOUNT
$38.99
CAMCORDER
MOUNT
If you are like us you want to record some of your Bronco trips it is fun to
get good footage of 4 wheeling to watch when it is too cold to go wheeling.
Just bolt this mount to any 1"to 2.5" tube and hit record. this is a good
solid mount to put keep your camera on and with a handle you can swivel your
camera to get good shots of the trail.
Camera not included
All Fourtreks Modular
Mounting components are precision-machined from T-6061 aluminum for light
weight yet high strength. The system is made up of two basic components; a
clamp ring and an adapter. The clamp ring is precisely machined to clamp
around your exact roll bar diameter. They manufacture clamp rings for 1",
1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll
bars. The two-piece clamp ring bolts around your roll bar using stainless
steel hardware. The second component is the adapter. The adapter bolts onto
either side of the clamp ring allowing two adapters to be mounted to the
same clamp ring, if desired. The adapters are designed to hold a Four
Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks,
fire extinguishers, cameras, camcorders roof racks load bars and grab bar
handles for your passengers. Fourtreks offers all of the adapters in a
kit form with clamp rings or individual components so that you can mix and
match your own systems. When ordering please let us know what size bar
you will mount it to.
Shopping Cart
Part Number
PART
Price
91-50120
CAMCORDER MOUNT
$82.99
FIRE
EXTINGUISHER MOUNT
Your
looking for a way to mount that fire extinguisher in your vehicle. Don't
use hose clamps to fix it to the roll bar! Hose clamps belong on your
radiator hoses under the hood. Instead, use our Modular Fire
Extinguisher Mount. Fully cnc machined from 6061-T6 billet
aluminum for a perfect fit. This kit comes with a fire
extinguisher adapter bar and modular clamp ring. Stainless steel hardware
included. Available for many popular roll bar diameters.
This
mount can easily support the weight of a 3.5 lbs fire extinguisher.
Designed to fit a wide variety of fire extinguishers and their mounting
brackets.
Fire Extinguisher not included
All Fourtreks Modular
Mounting components are precision-machined from T-6061 aluminum for light
weight yet high strength. The system is made up of two basic components; a
clamp ring and an adapter. The clamp ring is precisely machined to clamp
around your exact roll bar diameter. They manufacture clamp rings for 1",
1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll
bars. The two-piece clamp ring bolts around your roll bar using stainless
steel hardware. The second component is the adapter. The adapter bolts onto
either side of the clamp ring allowing two adapters to be mounted to the
same clamp ring, if desired. The adapters are designed to hold a Four
Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks,
fire extinguishers, cameras, camcorders roof racks load bars and grab bar
handles for your passengers. Fourtreks offers all of the adapters in a
kit form with clamp rings or individual components so that you can mix and
match your own systems. When ordering please let us know what size bar
you will mount it to.
Shopping Cart
Part Number
PART
Price
91-50130
FIRE EXTINGUISHER MOUNT
$46.99
GPS MOUNT
You spent
the money for your global positioning system (GPS) and now your looking for
way to mount it in your four wheel drive, sand car or desert race vehicle.
Mount it on the roll cage using our Modular GPS Mount!
This mount is perfect for mounting your unit to the dash bar tubing of your
roll cage. It bolts directly to the bracket that comes with your GPS
unit. The system comes with a billet aluminum GPS adapter
bar, stainless steel hardware and billet aluminum
modular clamp ring of your choice.
GPS not included
All Fourtreks Modular
Mounting components are precision-machined from T-6061 aluminum for light
weight yet high strength. The system is made up of two basic components; a
clamp ring and an adapter. The clamp ring is precisely machined to clamp
around your exact roll bar diameter. They manufacture clamp rings for 1",
1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll
bars. The two-piece clamp ring bolts around your roll bar using stainless
steel hardware. The second component is the adapter. The adapter bolts onto
either side of the clamp ring allowing two adapters to be mounted to the
same clamp ring, if desired. The adapters are designed to hold a Four
Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks,
fire extinguishers, cameras, camcorders roof racks load bars and grab bar
handles for your passengers. Fourtreks offers all of the adapters in a
kit form with clamp rings or individual components so that you can mix and
match your own systems. When ordering please let us know what size bar
you will mount it to.
Shopping Cart
Part Number
PART
Price
91-50140
GPS MOUNT
$46.99
MAGLIGHT
MOUNT
Need a place to mount that
Maglite that keeps rolling around in the bottom of your four wheel drive?
Mount it on the roll bar with our new Modular Maglite Mounts.
Can be used on horizontal, angled or vertical tube of your roll cage. These
mounts feature a 0.250" Delrin tipped spring ball detent plunger that holds
the flashlight firmly in the mount when it is snapped into place. Just pull
it out to retrieve and pop it back in place to store your flashlight.
Delrin detent plungers hold flashlight in the mounts with 20lbs of force per
side. All billet aluminum parts and stainless steel hardware included.
This new Fourtreks option is available for many popular roll bar diameters.
These mounts work with all length "D" size battery Maglites!
Maglite shown not included.
All Fourtreks Modular
Mounting components are precision-machined from T-6061 aluminum for light
weight yet high strength. The system is made up of two basic components; a
clamp ring and an adapter. The clamp ring is precisely machined to clamp
around your exact roll bar diameter. They manufacture clamp rings for 1",
1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll
bars. The two-piece clamp ring bolts around your roll bar using stainless
steel hardware. The second component is the adapter. The adapter bolts onto
either side of the clamp ring allowing two adapters to be mounted to the
same clamp ring, if desired. The adapters are designed to hold a Four
Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks,
fire extinguishers, cameras, camcorders roof racks load bars and grab bar
handles for your passengers. Fourtreks offers all of the adapters in a
kit form with clamp rings or individual components so that you can mix and
match your own systems. When ordering please let us know what size bar
you will mount it to.
Shopping Cart
Part Number
PART
Price
91-50150
FLASHLIGHT MOUNT
$93.99
HIGH LIFT
JACK MOUNT
Here is the solution to
the never-ending quest for a good, solid and convenient place to mount the
four wheeler's best friend - the Hi-lift jack. Mount it on your
roll cage, roof rack or bumper! Our Billet Aluminum
mounts allow you to mount your Hi-lift securely on to your tube in the area
of your choice. These mounts can be ordered with stainless steel
wing nuts and hardware or our self sealing aluminum wing
nuts. The billet aluminum wing nut option will seal the threads to
keep dirt and grime off of the studs your jack beam sits on. Available
for a wide range of tubing diameter applications. See pull down menu for
our extensive sizing options. Each kit includes (2) mounts and all of the
necessary stainless steel hardware.
High lift jack not included
All Fourtreks Modular
Mounting components are precision-machined from T-6061 aluminum for light
weight yet high strength. The system is made up of two basic components; a
clamp ring and an adapter. The clamp ring is precisely machined to clamp
around your exact roll bar diameter. They manufacture clamp rings for 1",
1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll
bars. The two-piece clamp ring bolts around your roll bar using stainless
steel hardware. The second component is the adapter. The adapter bolts onto
either side of the clamp ring allowing two adapters to be mounted to the
same clamp ring, if desired. The adapters are designed to hold a Four
Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks,
fire extinguishers, cameras, camcorders roof racks load bars and grab bar
handles for your passengers. Fourtreks offers all of the adapters in a
kit form with clamp rings or individual components so that you can mix and
match your own systems. When ordering please let us know what size bar
you will mount it to.
Shopping Cart
Part Number
PART
Price
91-50172
HIGH LIFT JACK MOUNT WITH STAINLESS STEEL MOUNTING
HARDWARE
$121.99
91-50171
HIGH LIFT JACK MOUNT WITH ALUMINUM MOUNTING HARDWARE
$103.99
SHOVEL
MOUNT
Need a place to mount that
shovel? Mount it on the roll cage or roof rack with our Modular
Shovel Mounts! These mounts feature a rubber clamp that is not
affected by cold or hot climates and is UV resistant for long life.
Combined with our billet aluminum clamp rings and adapters
makes for a complete kit to mount your shovel. All hardware is
stainless steel. This new Fourtreks product is available for many
popular tubing diameters. Check out our pull down menu for extensive sizing
options. This kit comes with (2) mounts. Each mount can support up to
22lbs. These mounts can hold objects from 1" to 2-1/2" in diameter. Can be
used with axes, hoses, rifles, shotguns, fishing gear and various other
tools. Just use your imagination.
Shovel not included
All Fourtreks Modular
Mounting components are precision-machined from T-6061 aluminum for light
weight yet high strength. The system is made up of two basic components; a
clamp ring and an adapter. The clamp ring is precisely machined to clamp
around your exact roll bar diameter. They manufacture clamp rings for 1",
1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll
bars. The two-piece clamp ring bolts around your roll bar using stainless
steel hardware. The second component is the adapter. The adapter bolts onto
either side of the clamp ring allowing two adapters to be mounted to the
same clamp ring, if desired. The adapters are designed to hold a Four
Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks,
fire extinguishers, cameras, camcorders roof racks load bars and grab bar
handles for your passengers. Fourtreks offers all of the adapters in a
kit form with clamp rings or individual components so that you can mix and
match your own systems. When ordering please let us know what size bar
you will mount it to.
Shopping Cart
Part Number
PART
Price
91-50160
SHOVEL MOUNT
$103.99
GRAB HANDLE
These
custom Modular Aluminum Handles are fully machined from
billet 6061-T6 and are rock solid! You get your choice of
a 6" or 12" length black anodized rod. Rod diameter is 1". These handles
can be used on a wide range of roll bar diameters. All stainless steel
hardware included.
All Fourtreks Modular
Mounting components are precision-machined from T-6061 aluminum for light
weight yet high strength. The system is made up of two basic components; a
clamp ring and an adapter. The clamp ring is precisely machined to clamp
around your exact roll bar diameter. They manufacture clamp rings for 1",
1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll
bars. The two-piece clamp ring bolts around your roll bar using stainless
steel hardware. The second component is the adapter. The adapter bolts onto
either side of the clamp ring allowing two adapters to be mounted to the
same clamp ring, if desired. The adapters are designed to hold a Four
Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks,
fire extinguishers, cameras, camcorders roof racks load bars and grab bar
handles for your passengers. Fourtreks offers all of the adapters in a
kit form with clamp rings or individual components so that you can mix and
match your own systems. When ordering please let us know what size bar
you will mount it to.
Shopping Cart
Part Number
PART
Price
91-50180
GRAB HANDLE
$93.99
DUAL TOOL
MOUNT
This kit comes with (2)
mounts. Each mount can support up to 44lbs. The rubber clamps can hold
objects ranging is sizes from 1" to 2-1/2" in diameter. Can be used with
axes hoses, rifles, shotguns, fishing gear and various other tools. Just
use your imagination!
Shovel
and axe shown not included.
All Fourtreks Modular
Mounting components are precision-machined from T-6061 aluminum for light
weight yet high strength. The system is made up of two basic components; a
clamp ring and an adapter. The clamp ring is precisely machined to clamp
around your exact roll bar diameter. They manufacture clamp rings for 1",
1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll
bars. The two-piece clamp ring bolts around your roll bar using stainless
steel hardware. The second component is the adapter. The adapter bolts onto
either side of the clamp ring allowing two adapters to be mounted to the
same clamp ring, if desired. The adapters are designed to hold a Four
Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks,
fire extinguishers, cameras, camcorders roof racks load bars and grab bar
handles for your passengers. Fourtreks offers all of the adapters in a
kit form with clamp rings or individual components so that you can mix and
match your own systems. When ordering please let us know what size bar
you will mount it to.
Shopping Cart
Part Number
PART
Price
91-50190
DUAL TOOL MOUNT
$117.99
ALUMINUM
POWER TANK BRACKET
The new Super Bracket is smaller than the Power Bracket which allows it to
be mounted in tighter locations in a vehicle or trailer. This bracket holds
both the 10 lb. and the 15 lb. And, unlike our Power Brackets, there is no
drilling required if used with our aluminum roll bar clamps. Very clean.
Shopping Cart
Part Number
PART
Price
91-22411
SUPER BRACKET 5 Lbs. POWERTANK
$59.99
91-22412
SUPER BRACKET 10 and 15 Lbs. POWERTANK
$59.99
POWERTANK
ROLL BAR MOUNTS
With our mounting brackets these ABC (Aluminum Billet Clamp) Clamps make
mounting your Power Tank easy and clean. The compact design allows it to fit
between the roll bar and the inside of the rig. The Allen socket button head
bolts are nothing less than stainless steel. Sold in pairs. Fits tubing
diameters: 1.50", 1.75", 2.00",& 2.25"
Before ordering products from B.C. Broncos, please read the following information, including warranty information and statement of liability. By placing an order to purchase products from B.C. Broncos, you are confirming that you have read and agree to our warranty and statement of liability.
WARRANTY POLICY
Within 30 days of receiving a product, if you find the product defective or incorrect, return it to B.C. Broncos. We will repair or replace any product found to be defective, subject to our inspection. Warranty is limited to the cost of the replacement part. Some items purchased from B.C. Broncos and built by other manufacturers may or may not carry
warranty's issued by the manufacturer. B.C. Broncos is not a party to such
warranty's, and all claims on manufacturer warranty's should be made directly to the manufacturer. No further
warranty's are expressed or implied.
RETURNED GOODS POLICY
All items returned to B.C. Broncos which were originally paid for by credit card are subject to a 10% restocking fee.
Their will be no restocking fee if you want an in-store credit.
STATEMENT OF LIMITED LIABILITY
Because B.C. Broncos has no control over the installation and/or other uses of our products, B.C. Broncos will not be held liable for personal, property, legal, or financial damages or claims stemming from the use or misuse of any product we manufacture or sell. The purchaser assumes all responsibility for the safety, proper installation, performance, and applicability of these products. If you have any doubts or concerns about the installation, function, performance or proper use of any of our products, please call our toll free number before proceeding with the installation or use of the product.
