|
|
| |
| DRIVE TRAIN / AUTO TRANSMISSION & ADAPTERS |
| |
| C-4 TRANSMISSION |
| |
|
| |
Advance Adapter Our Ford C4 adapter to the Bronco Dana 20
is 7.375 in length. The adapter material is 356 T-6 heat treated aluminum
alloy, and the adapter has a provision to retain the original early Bronco
mount. The adapter kit includes an adapter housing, new C4 output shaft,
alignment retainer, snap ring, gaskets, seal, o-ring, vent, fastening
hardware and adapter instructions.
Transfer Case The adapter assembly will fit any 1966-77
Bronco Dana 20 transfer case. This cast iron, gear driven case has a low
range of 2.46:1 and a front output shaft on the driver’s side.
Transmission The kit is designed for exclusive use with the
Ford C4 automatic transmission. The Ford C4 is a 3 speed transmission was
used between 1963-’82. The transmission bellhousing is
Removable, the overall length measures 17.00”.
|
Click for price |
Part Number |
PART |
|
22-17030 |
C4 TO D20 ADAPTER |
|
22-00210 |
C4 TRANSMISSION MOUNT KIT BLACK |
|
22-00220 |
C4 TRANSMISSION MOUNT KIT BLUE |
|
22-00310 |
C4 TRANSMISSION MOUNT SNUBBER |
|
22-00201 |
C4 TRANSMISSION MOUNT HARDWARE KIT |
|
11- 71011 |
C-4 KICK DOWN CABLE FOR CARB |
|
11- 81011 |
C-4 KICK DOWN CABLE FOR EFI |
|
22-17031
|
C-4 TO ADAPTER GASKET |
|
|
|
| |
| C-6 TRANSMISSION |
|
| |
Advance Adapter The Ford C6 adapter to the Bronco Dana 20
is 8.00” in length. The adapter material is 356 T-6 heat treated aluminum
alloy, and the adapter has a provision to retain the original early Bronco
mount. The adapter kit includes an adapter housing, spud shaft, crossmember
sleeve, alignment retainer, snap ring, gaskets, o-ring, fastening hardware
and adapter instructions.
Transfer Case The adapter assembly will fit any 1966-77
Bronco Dana 20 transfer case. This adapter will only work with the “T” style
shifter. Transfer cases with a “J” style linkage will require modifications
to retain this linkage. This cast iron, gear driven case has a low range of
2.46:1 and a front output shaft on the driver’s side.
Transmission This adapter assembly is designed for
exclusive use with the Ford C6 automatic transmission 4wd. The 4wd output
shaft must stickout 7” beyond the transmission case. The C6 is a 3 speed,
heavy duty automatic with a case length of 20”, a non-removable bell housing
and a oil pan that is held on with 17 bolts.
 |
Click for price |
Part Number |
PART |
|
22-17070 |
C-6 TO D20 ADAPTER |
|
22-17072 |
C-6 DIPSTICK GROMMIT |
|
11-71012 |
C-6 KICK DOWN CABLE FOR CARB |
|
11- 81012 |
C-6 KICK DOWN CABLE FOR EFI |
|
22-17071 |
C-6 TO ADAPTER GASKET |
|
|
|
| |
| AOD TRANSMISSION |
| |
|
Advance Adapter Our Ford AOD adapter to the Bronco Dana 20
is 6.00” in length. The adapter material is 356 T-6 heat treated aluminum
alloy, and the adapter has a provision to retain the original early Bronco
mount. The adapter kit includes an adapter housing, new AOD output shaft,
spud shaft, retainer, bearing, snap ring, gasket, seal, o-ring, fastening
hardware and adapter instructions.
Transfer Case The adapter assembly will fit any 1966-77
Bronco Dana 20 transfer case. T-style transfer case shifter linkage is
required.
1983-87 Transmission This adapter kit is designed for
exclusive use with the first generation Ford AOD automatic transmission.
This 4 speed, overdrive transmission was first introduced during the 1983-87
model years. It is very important that the new main shaft furnished is
compared to the original main shaft being replaced. In 1988, Ford changed
the oiling system of the AOD that required a different output shaft.
1988-91Transmission This adapter kit is designed for
exclusive use with the second generation Ford AOD automatic transmission.
This 4 speed, overdrive transmission was introduced during the 1988-91
model years. It is very important that the new main shaft furnished is
compared to the original main shaft being replaced.
| |
Click for price |
Part Number |
PART |
|
22-17021 |
AOD TO D20 ADAPTER EARLY (
80-87 ) |
|
22-17022 |
AOD TOTO D20 ADAPTER LATE
( 88-UP ) |
|
22-17024 |
AOD DIPSTICK GROMMIT |
|
11- 71012 |
AOD KICK DOWN CABLE FOR CARB |
|
11-81013
|
AOD KICK DOWN CABLE FOR EFI |
|
22-17023 |
AOD TO ADAPTER GASKET |
|
|
|
| |
| 700R4 TO D20 TRANSFER CASE ADAPTER KIT |
Advance Adapter Our GM 700R-4 adapter to
the Bronco Dana 20 is 2.50” in length. The adapter material is 356 T-6 heat
treated aluminum alloy and has provision for our heavy duty transmission
mount. The adapter kit includes two adapter housing, new 700R-4 output
shaft, spud shaft, shifter linkage bracket, bearing retainer, bearing, snap
ring, o-ring, gasket, seal, fastening hardware, and adapter instructions.
Transfer Case The adapter assembly will fit
any 1966-77 Bronco Dana 20 transfer case. This adapter will only work with
the “T” style shifter. Transfer cases with a “J” style linkage will require
modifications to retain this linkage.
Transmission This kit is designed for
exclusive use with the 4wd 700R-4 / 4L60 / 4L60E manufactured thru 1996. The
overall case length of the transmission is 23.375”, has a non-removable bell
housing, and a 4 bolt square rear case. Late model 4L60E automatics will
have a removable bell housing and a 6 bolt hex pattern rear case. The late
model automatic will require an additional Advance Adapter to work with this
kit.
Options 716073 VSS kit. Required for early
model 4L60E with a non-removable bell housing and a 4 bolt square case.
| |
Click for price |
Part Number |
PART |
|
22-17010 |
700R4 TO D20 |
|
|
|
| |
| FLEX PLATE |
|
When looking for a flex plate you need to know three
things 1. The diameter of the torque
converter you have, they put the 10.5" and the 11" in the Bronco 2. The balance of the engine,Here is the info from Ford,
For a 302 1968-1980 the imbalance is 28oz For a 302 1981-2001 the imbalance is 50oz. For ALL 351W 1969-1997 the imbalance is 28oz 3. The amount of teeth to engage the starter,
the correct number of teeth for a Bronco is 164 teeth.
To make sure you have or need to have a flywheel look at this PDF
| |
Click for price |
Part Number |
PART |
ENGINE
SIZE TRANSMISSION TYPE |
|
16-00331 |
FLEX PLATE 164 TOOTH |
289-302-351W C-4 or AOD 28oz |
|
16-00332 |
FLEX PLATE 164 TOOTH |
1981-01 5.0L C-4 or AOD 50 oz |
|
16-00341 |
FLEX PLAT 164 TOOTH |
289-302-351W C-6 28oz |
|
16-00342 |
FLEX PLATE 164 TOOTH |
1981-01 5.0L C-6 50 oz |
|
16-00310 |
FLEX PLATE 164 TOOTH |
FLEX PLATE BOLTS |
|
16-00320 |
FLEX PLATE 164 TOOTH |
TORQUE CONVERTER NUTS SET OF 4 |
|
|
| |
|
|
|
|
|
|
PLEASE READ THE FOLLOWING
Before ordering products from B.C. Broncos, please read the following information, including warranty information and statement of liability. By placing an order to purchase products from B.C. Broncos, you are confirming that you have read and agree to our warranty and statement of liability.
INTERNET PRODUCT & PRICING POLICY
Due to the constant market changes, prices listed online are subject to change without notice. Additionally, sometimes parts will very from the picture shown due to slight manufacturing changes and or different sources.
WARRANTY POLICY
Within 30 days of receiving a product, if you find the product defective or incorrect, return it to B.C. Broncos. We will repair or replace any product found to be defective, subject to our inspection. Warranty is limited to the cost of the replacement part. Some items purchased from B.C. Broncos and built by other manufacturers may or may not carry warranty's issued by the manufacturer. B.C. Broncos is not a party to such warranty's, and all claims on manufacturer warranty's should be made directly to the manufacturer. No further warranty's are expressed or implied.
RETURNED GOODS POLICY
All items returned to B.C. Broncos which were originally paid for by credit card are subject to a 10% restocking fee.
STATEMENT OF LIMITED LIABILITY
Because B.C. Broncos has no control over the installation and/or other uses of our products, B.C. Broncos will not be held liable for personal, property, legal, or financial damages or claims stemming from the use or misuse of any product we manufacture or sell. The purchaser assumes all responsibility for the safety, proper installation, performance, and applicability of these products. If you have any doubts or concerns about the installation, function, performance or proper use of any of our products, please call our toll free number before proceeding with the installation or use of the product
SHIPPING POLICY
Please note: B.C. Broncos will not pay premium shipping
for any reason. We will ship next day, same day, 3 day or any other
premium shipping method that you like but you will have to pay the cost and
take the risk that it will get to you when you want it and that it is what you
wanted. We will do our best to get what you want to you when you want it. But
premium shipping is extra work for us that we are doing for you as a favor and
we make no money on any shipping and will not refund shipping if things
do not turn out the way you expected.
We hope you find some valuable information on these pages. If you
need more information, give us a call or check back later. We will be updating
often. Input for improvement on this page or our products is always welcome.
|
