WELCOME EARLY BRONCO ENTHUSIASTS!


IGNITION COMPONENTS


FOR A COMPLETE PARTS LISTING PLEASE FEEL FREE TO VISIT OUR ON-LINE STORE BY CLICKING THE BUTTON BELOW.
COILS
FOR A COMPLETE PARTS LISTING PLEASE FEEL FREE TO VISIT OUR ON-LINE STORE BY CLICKING THE BUTTON BELOW.


COIL MOUNTS




10MM SPARK PLUG WIRES
Performance Distributors LiveWires® come with a space age, heat resistant sleeving that provides superior
protection to the plug wires from the extreme under hood temperatures generated by the exhaust. The sleeving
is a non-flammable heat treated glass braid, much like the type used on today's ovens. The unique sleeving on
the LiveWires provides heat protection up to +1400° F and offers excellent resistance to moisture and chemicals.

LiveWires are custom fit, so no assembly is required. Each wire is numbered on both ends for the correct cylinder
making installation, removal and re-installation quick and easy. No cutting, splicing or crimping is required like
other aftermarket wire sets. Some applications are available for both over the valve covers and under the headers.

LiveWires have a durable and long lasting silicone jacket and insulation. Heat shrink applied between the boot and
the sleeving keeps dirt and moisture away from wire terminals. Dielectric grease is included with all sets and should
be applied to the spark plug boots to prevent voltage leakage and keep wire terminals and boots from sticking to
the plug.

LiveWires are a spiral core wire which means they have a stainless steel wire wrapped around a magnetic core.
This is a suppression type wire so there is no electronic interference with the radio or computer and they work well
with delay boxes and stutter boxes. A spiral wound core also offers extremely low resistance of 300 - 350 Ohms
per foot for optimum spark travel.

Flame-Thrower II coils feature a super low resistance which make them the ideal coil for Ignitor II ignition systems as well as many other high energy ignitions. Low resistance and improved turns ratio help to produce up to 45,000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy
Our new coil bracket bolts up to a Sanden A/C compressor to fit nicely on the engine in front of the distributor allowing you to use a short coil wire. This bracket also has a place to mount a noise suppressor comes with mounting hardware
FOR A COMPLETE PARTS LISTING PLEASE FEEL FREE TO VISIT OUR ON-LINE STORE BY CLICKING THE BUTTON BELOW.


PERTRONIX IGNITOR
The Ignitor II has many of the same great feature that the Ignitor has, but its smarter. Ignitor II units sense the coil current level and use a powerful micro controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire RPM range.
Features

Ignitor II systems develop up to 4 times more energy between 3000 and 5000 RPM than standard ignition systems. High RPM performance is improved when used with the Flame-Thrower II super low resistance (0.6 ohms) 45,000 volt coil.
 
•Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
•Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
•Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil and module life.
•Adjusts spark timing at higher RPMs to compensate for the inherent electronic delay.
•Senses startup and develops more energy for quicker, easier starting. Built in reverse polarity and over current protection shuts down the system, preventing component damage. 
•Legal in all 50 states and Canada (C.A.R.B. E.O. #D-57-2)



EFI DISTRIBUTORS
Our new 5.0 Hot Forged Distributor is the replacement you need to provide your EFI conversion
with reliable performance and show quality looks! This brand new distributor encompasses
the toughness and durability that the 5.0 engine demands. Hot forging provides a denser,
stronger and more durable distributor compared to cast aluminum and billet distributors.
Each unit is tested for thermal shock and RPM accuracy between 8000 and 10,000 rpm’s.
The Hot Forged distributor is machined using computerized CNC mills and lathes to create
exact tolerances. includes our high dwell Dyna-Module for increased spark
duration which provides a better burn of the fuel mixture. Comes with a steel gear installed
for compatible roller camshafts. The Hot Forged distributor includes the brass terminal cap
and rotor in your choice of blue or red(if you don't tell us you'll get blue). This EFI distributor is made in the USA.
FOR A COMPLETE PARTS LISTING PLEASE FEEL FREE TO VISIT OUR ON-LINE STORE BY CLICKING THE BUTTON BELOW.
PERTRONIX DISTRIBUTORS
Plug n play billet distributors are designed for maximum ignition performance and easy installation all at a price that you can afford. Replace your outdated points or electronic distributor with this performance proven distributor and which features the patented Ignitor® II electronics and a CNC machined 6061 T-6 polished billet housing.
Features
•Integrated patented Ignitor II technology with adaptive dwell control.
•Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution.
•A powerful micro controller with adaptive dwell algorithms constantly adjust the dwell angle to maintain peak energy throughout the entire RPM range for increased high and low RPM performance.
•Ignitor II compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
•Synchronized peak current and spark timing reduces heat build-up.
•Precision CNC machined billet housings are polished to a high luster.
•Tempered distributor shafts have low torsion displacement for accurate timing and longer life.
•Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and high RPM vibration.
•Precision stamped advance weights eliminate erratic timing.
•Adjustable mechanical advance with proprietary limiting functions permits multiple settings. Distributors are factory set with a performance advance curve and are provided with additional springs for custom advance curves.
•High dielectric strength cap with male or female brass terminals and premium rotor with brass contact.
•Compatible with most Capacitive Discharge Systems.
•Legal in all 50 states and Canada (C.A.R.B. E.O. #D-57-12). Note: Non vacuum advance distributors do not have an E.O. number and are not legal for sale or use on pollution controlled motor vehicles.
•Warranty: 30 months electronics / Limited 1 year mechanical.

Flame-Thrower billet distributors are frequently used in tight engine compartments due to their Plug n’ Play design and relatively small size.

Although our distributors fit their intended engine application, each vehicle application must be evaluated independently to insure adequate space for distributor fitment as well as air cleaner and hood clearance.

FOR A COMPLETE PARTS LISTING PLEASE FEEL FREE TO VISIT OUR ON-LINE STORE BY CLICKING THE BUTTON BELOW.