ALL DASHES COME WITH MOUNTING HOLES, DEFROST VENTS, COLUMN ACCESS HOLES AND COLUMN HOLE.

BC Broncos, the Original innovator of the digital gauge cluster for Early Broncos, now raises the bar with this NEW and IMPROVED cluster that is superior to the previous version in every way. This new gauge cluster features:

• Bigger, BRIGHTER digits and indicating lights
• User-calibrated speedometer, odometer, trip meter, high speed record and ¼-mile time.
• Quicker refresh rates for water temp, oil pressure and fuel level gauges
• All lights and readouts can be dimmed
• Available indicator light to use for "Check Engine" light with EFI motors (or for anything you prefer, such as E-brake on, aux. beams on, etc.)
• Fully self-contained with no external computer to mount and wire up
• 1" thick and weather resistant
• All sending units are included
• Bezel not included (stock bezel can be installed with 4 screws)
• NOW YOU CAN UP GRADE THIS GAUGE TO A GPS BASED SPEEDOMETER.

Every other Bronco parts house now carries the older digital dash originally developed by BC Broncos. This new IMPROVED unit is available only through BC Broncos, so if you buy a digital gauge cluster somewhere else, you're settling for second best. Buy the BEST! Buy BC Broncos!

  These gauges are assembled when ordered so you have the option of High Brightness Red, Green, Amber or Blue faces and three different outer rings BLACK, WHITE AND SILVER.

• WATER TEMP
• 2 5/8" diameter.
• Monitors water temperature from 100 to 300 degrees.
• Microprocessor controlled for accuracy and dependability.
• Recalls highest temperature reading.
• Programmable output for external high water temperature warning. Must purchase R1000 output relay kit for use with devices that draw more than 2 amps.
• Utilizes an electrical sender for easy installation and versatility. Requires S8013 Sender.
• Available in High Brightness Red, Green, Amber or Blue.
• 

• OIL
• 2 5/8" diameter.
• Displays 0-100 PSI in 1lb. increments for precise readings.
• Microprocessor controlled for accuracy and dependability.
• Recalls highest reading and lowest reading.
• Utilizes a remote sender for safe, easy, in-dash installation. Requires S8014 Sender.
• Programmable output for external low oil pressure warning. Must purchase R1000 output relay kit for use with devices that draw more than 2 amps.
• Available in High Brightness Red, Green, Amber or Blue.
• 

• SPEEDO
• 3 3/8" diameter.
• Programmable, 200 mph speedometer with LED bar graph, digital readouts, odometer with trip.
• Easy one button calibration. No screwdriver or pace car necessary.
• Can be calibrated as many times as necessary for gear ratio and tire size changes.
• Recalls high speed, 0-60 mph time and 1/4 mile ET.
• Works with most existing electronic speed sensors.
• Transmissions equipped with mechanical cables. Requires S9013 Sender.
• Available in High Brightness Red, Green, Amber or Blue display
• 

• TACH
• 3 3/8" diameter.
• 0-9900 RPM in 100-RPM increment digital readout.
• 0-6000 RPM LED bar graph for quick reference.
• Recalls peak RPM.
• Works with all standard 4, 6 or 8 cylinder 4-stroke engines.
• Available in High Brightness Red, Green, Amber or Blue display.
• 

• VOLT
• 2 5/8" diameter.
• Monitors system voltage from 8-18 volts in .1-volt increments.
• Microprocessor controlled for accuracy and dependability.
• Programmable output for external low voltage warning. Must purchase R1000 output relay kit for use with devices that draw more than 2 amps.
• Available in High Brightness Red, Green, Amber or Blue.
• 

• FUEL
• 2 5/8" diameter.
• Microprocessor controlled for accuracy and dependability.
• Utilizes existing Ford / Chrysler style 73-10 ohm fuel lever sender for easy installation.
• Displays your fuel tank level from 0-99% in 1% increments.
• Memory recall shows high and low fuel level readings.
• Programmable output for external low fuel level warning. Must purchase R1000 output relay kit for use with devices that draw more than 2 amps.
• Available in High Brightness Red, Green, Amber or Blue.
• 

• CLOCK
• 2 5/8" diameter.
• Easy to program with separate buttons for hour and minute settings.
• Microprocessor controlled with an integrated crystal for "Swiss Watch" accuracy.
• Available in High Brightness Red, Green, Amber or Blue.
• 

• TRANS
• 2 5/8" diameter.
• Monitors transmission-operating temperature from 100 to 300 degrees.
• Microprocessor controlled for accuracy and dependability. Requires S8013 Sender.
• Recalls highest temperature reading.
• Programmable output for external high transmission temperature warning. Must purchase R1000 output relay kit for use with devices that draw more than 2 amps.
• Utilizes an electrical sender for easy installation and versatility.
• Available in High Brightness Red, Green, Amber or Blue.
• 

        These gauges are assembled when ordered so you have the option of three different color faces and three different rings .When you turn the lights on the words, digits and tick marks turn blue for an awesome look and are extremely easy to read.

This is the perfect upgrade to any analog or digital NORDSKOG gauge. A GPS based speedometer is the best way to make sure you have a speedometer that is dead on with so many tire and gear changes available it is easy to have an inaccurate gauge. By just wiring in a few wires and mounting the GPS antenna you can have an accurate Speedo and eliminate the Speedo cable and or pulse generator. This also works great if you are running an aftermarket transfer case like the STAK.

This is a complete analog gauge cluster, featuring a white face and aluminum ring for a clean look. This is a complete sealed bolt in unit with a GPS UPGRADEABLE speedometer, odometer, volt gauge, oil pressure, water temp and fuel gauge sit comes with all of the sending units. You do not need to reuse any of the old stock gauge, bezel, or Speedo cable.

This is a great tool for your tool bag. This is just an easy and simple way to quickly check a 12V system. Is the battery in your wife's car going bad? Just get your tester out and have a look, your buddy calls and says his car won't start get your tester out and have a look. From cars, boats to lawn tractors this tool makes it easy to test any 12 volt system.

 

• 2 1/16" diameter.
• Monitors system voltage from 8-18 volts in .1-volt increments.
• No installation required.
• Just push the unit into existing cigarette lighter or 12-volt accessory port.
• Microprocessor controlled for accuracy and dependability.
• Recalls highest voltage.
   

STOCK SWITCH KNOBS AND BEZELS

STOCK GAUGES UPGRADES

When you want to clean up or update your instrument cluster you have a few ways you can go like replacing the light bulbs with our LED kit or new glass and white face gauge covers.

This new billet Aluminum column cover is a great way to update the column area of the dash. You have two options, one is a for a 2" aftermarket column and the other is a 2.5" for a stock type column. These covers are CNC machined  and Clear anodized to keep them looking good. The two half's are located with stainless dowel pins to insure you have proper alignment when installed.