|
|
| |
| INTERIOR DASH |
| |
| NEW REPLACEMENT STEEL DASH |
| This steel replacement dash is
perfect for those who would like to re-configure their dash. This
precision-formed sheet metal to give you a clean slate to arrange your gauges,
switches or A/C vents however you'd like. Move your glove box inboard to clear
your full roll cage, relocate the stock gauge cluster to the center as we've
done with Chuck's bronco (see picture), or just get a fresh start after a
previous owner hacked up the original dash. Whatever the reason, this piece is
perfect for designing your own dash configuration while maintaining a clean,
"factory" appearance. Comes as unpainted sheet metal. The standard unit comes
with Laser cut holes for the steering column, column bolt access, windshield
bolt holes and defrost vents only. The face of the dash is the same thickness
as the stock dash but the sides are made of thicker steel. The standard dash
comes with two hidden grounding studs and a built in defrost duct, no need to
use or replace the stock plastic one.


ALL DASHES COME WITH
MOUNTING HOLES, DEFROST VENTS, COLUMN ACCESS HOLES AND COLUMN HOLE. |
Click for price |
Part Number |
PART |
 |
72-40010 |
NEW REPLACEMENT DASH BLANK |
 |
72-40020 |
NEW REPLACEMENT DASH GLOVE BOX HOLE ONLY 5"
OFFSET
NOT PICTURED |
 |
72-40031 |
NEW REPLACEMENT DASH SPEEDO HOLE LEFT STOCK GLOVE BOX HOLE NOT PICTURED |
 |
72-40021 |
NEW REPLACEMENT DASH SPEEDO HOLE LEFT GLOVE BOX HOLE 5" OFFSET
NOT PICTURED |
 |
72-40022 |
NEW REPLACEMENT DASH SPEEDO HOLE CENTER GLOVE BOX HOLE 5" OFFSET
NOT PICTURED |
|
|
|
|
ANALOG GAUGE CLUSTER |
This is a complete analog gauge cluster,
featuring a white face and aluminum ring for a clean look. This is a
complete sealed bolt in unit with a GPS UPGRADEABLE speedometer,
odometer, volt gauge, oil pressure, water temp and fuel gauge sit comes
with all of the sending units. You do not need to reuse any of the old
stock gauge, bezel, or Speedo cable.
Now available in White, Black, Pewter and Cream





|
Click for price |
Part Number |
PART |
 |
89-01151 |
WHITE ANALOG GAUGE KIT |
 |
89-01152 |
BLACK ANALOG GAUGE KIT |
 |
89-01153 |
PEWTER ANALOG GAUGE KIT |
 |
89-01154 |
CREAM ANALOG GAUGE KIT |
|
| |
STOCK SWITCH KNOBS AND BEZELS |
| IGNITION SWITCH
 |
| |
Click for price |
Part Number |
PART |

|
72-20310 |
IGNITION SWITCH SET 66-77 |
 |
72-20204 |
IGNITION SWITCH BEZEL 66-77 |
 |
72-20012 |
IGNITION LOCK AND CYLINDER 66-77 |
 |
72-20011 |
IGNITION SWITCH CUP 66-77 |
 |
85-00120 |
IGNITION SWITCH 66-77 |
KIT COMES WITH SWITCH, BEZEL,
IGNITION CUP,LOCK CYLINDER AND 2 KEYS. |
|
|
|
IGNITION SWITCH KIT
 |
| |
Click for price |
Part Number |
PART |
 |
72-20311 |
IGNITION SWITCH SET 66-77 WITH KEYED ALIKE DOOR LOCKS |
KIT COMES WITH SWITCH, BEZEL, IGNITION CUP, LOCK CYLINDER, 2 DOOR LOCKS, 2
CLIPS AND 2 KEYS ALL KEYED ALIKE. |
|
|
| HEADLIGHT SWITCH
 |
| |
Click for price |
Part Number |
PART |
 |
72-20321 |
HEAD LIGHT SWITCH KIT 68-72 |
 |
72-20322 |
HEAD LIGHT SWITCH KIT 73-77 |
 |
72-20231 |
HEAD LIGHT SWITCH BEZEL 68-72 |
 |
72-20232 |
HEAD LIGHT SWITCH BEZEL 73-77 |
 |
72-20111 |
HEAD LIGHT KNOB 66-67 |
 |
72-20121 |
HEAD LIGHT KNOB 68-77 |
 |
72-20212 |
HEAD LIGHT SWITCH ALIGNMENT BOLT |
 |
85-00110 |
HEADLIGHT SWITCH 66-77 |
This is our easy install switch, the switch spacer is
mounted to the switch saving you lots of aggravation. |
|
|
| WINDSHIELD WIPER SWITCH
 |
Click for price |
Part number |
Part |
 |
72-20330 |
WIPER SWITCH KIT |
 |
72-20205 |
WIPER SWITCH BEZEL |
 |
72-20213 |
WIPER SWITCH BEZEL NUT |

|
85-00130 |
WIPER SWITCH |
 |
72-20102 |
WIPER KNOB |
|
|
EMERGENCY FLASHER SWITCH
 |
| |
Click for price |
Part Number |
PART |
 |
72-20341 |
EMERGENCY FLASHER SWITCH KIT 66 |
 |
72-20342 |
EMERGENCY FLASHER SWITCH KIT 68-72 |
 |
85-00140 |
EMERGENCY FLASHER SWITCH |
 |
72-20102 |
EMERGENCY FLASHER SWITCH KNOB |
 |
72-20201 |
EMERGENCY FLASHER SWITCH BEZEL |
 |
72-20215 |
EMERGENCY FLASHER SWITCH BEZEL NUT |
|
|
|
|
FUEL TANK SELECTOR SWITCH
 |
| |
Click for price |
Part Number |
PART |
 |
72-20350 |
FUEL SELECTOR SWITCH KIT |
 |
72-20208 |
FUEL SELECTOR SWITCH BEZEL |
 |
72-20211 |
FUEL SELECTOR SWITCH NUT |
 |
11-40130 |
FUEL SELECTOR SWITCH |
 |
72-20216 |
FUEL SELECTOR SWITCH NUT FOR AFTERMARKET SWITCHES |
KIT COMES WITH SWITCH, BEZEL, AND BEZEL NUT. |
|
|
| HEATER SWITCH

|
| |
Click for price |
Part Number |
PART |
 |
72-20361 |
HEATER SWITCH KIT 68-72 |
 |
72-20362 |
HEATER SWITCH KIT 73-77 |
 |
72-20241 |
HEATER SWITCH BEZEL 68-72 |
 |
72-20233 |
HEATER SWITCH BEZEL 73-77 |
 |
85-00160 |
HEATER SWITCH AND CABLE |
 |
72-20214 |
HEATER SWITCH BEZEL NUT |
 |
72-20102 |
HEATER SWITCH KNOB |
KIT COMES WITH SWITCH, CABLE, BEZEL, BEZEL NUT AND KNOB |
|
|
|
HEATER TEMPERATURE CONTROL
 |
| |
Click for price |
Part Number |
PART |
 |
72-30121 |
HEATER TEMP CABLE KIT 68-72 |
 |
72-30122 |
HEATER TEMP CABLE KIT 73-77 |
 |
72-30011 |
HEATER TEMP CABLE 68-72 |
 |
72-20016 |
HEATER TEMP CABLE KNOB |
KIT COMES WITH CABLE, BEZEL, BEZEL NUT AND KNOB |
|
|
|
DEFROST CONTROL
 |
| |
Click for price |
Part Number |
PART |
 |
72-30131 |
DEFROST CABLE KIT 66-67 |
 |
72-30132 |
DEFROST CABLE KIT 68-77 |
 |
72-30020 |
DEFROST CABLE |
 |
72-20102 |
DEFROST CABLE KNOB |
KIT COMES WITH CABLE, BEZEL, BEZEL NUT AND KNOB |
|
|
|
|
CHOKE CABLE

|
| |
Click for price |
Part Number |
PART |
 |
72-30131
| CHOKE CABLE KIT 66-67 |
 |
72-20206 |
CHOKE CABLE KIT 68-77 |
 |
72-30030 |
CHOKE CABLE |
 |
72-20102 |
CHOKE CABLE KNOB |
KIT COMES WITH CABLE, BEZEL, BEZEL NUT AND KNOB |
|
|
RADIO KNOBS
 |
| |
Click for price |
Part Number |
PART |
 |
72-20103 |
RADIO KNOB EACH |
 |
72-20209 |
RADIO KNOB BEZEL SET |
 |
72-20370 |
RADIO KNOB KIT (2 BEZELS 2 KNOBS) |
|
|
|
|
BRAKE WARNING LIGHT BEZEL
 |
| |
Click for price |
Part Number |
PART |
 |
72-20380 |
BRAKE WARNING LIGHT KIT |
 |
72-20207 |
BRAKE WARNING LIGHT BEZEL |
 |
84-24010 |
BRAKE WARNING LED BULB |
KIT COMES WITH BEZEL AND RED 1895 LED BULB |
|
|
|
BRAKE LIGHT SWITCH
 |
| |
Click for price |
Part Number |
PART |
 |
85-00311 |
BRAKE LIGHT SWITCH (66-67) |
 |
85-00312 |
BRAKE LIGHT SWITCH (68-77) |
|
|
|
| CIGARETTE LIGHTER

|
| |
Click for price |
Part Number |
PART |
 |
72-20104 |
CIGARETTE LIGHTER AND SOCKET KIT 66-67 |
 |
72-20105 |
CIGARETTE LIGHTER AND SOCKET KIT 68-77 |
THE KIT IS THE LIGHTER SOCKET,
ELEMENT, BEZEL AND KNOB |
|
|
|
BEZEL NUT TOOL
 |
| |
Click for price |
Part Number |
PART |
 |
93-50010 |
BEZEL NUT TOOL |
|
|
|
|
|
STOCK GAUGES UPGRADES |
When you want to clean up or update your
instrument cluster you have a few ways you can go like replacing the
light bulbs with our LED kit or new glass and white face gauge covers.

| |
Click for price |
Part Number |
PART |
 |
89-00440 |
WHITE
FACE GAUGE KIT |
 |
89-00420 |
REPLACEMENT GLASS |
 |
89-00450 |
RUBBER GASKET |
 |
89-00410 |
INSTRUMENT CLUSTER VOLTAGE REGULATOR |
 |
84-25110 |
LED GAUGE BULB KIT |
 |
89-00460 |
STOCK GAUGE MOUNTING HARDWARE KIT |
|
|
|
|
INDIGO GAUGES |
| This is a cool way to upgrade your stock
gauges just put these new faces on your old gauges hook up the wires,
mount the control module and you are done. Once your done you end up
with white face gauges during the day and at night they turn blue or
green.

| |
Click for price |
Part Number |
PART |
 |
89-00430 |
INDIGO LUMINESCENT GAUGES |
|
|
|
| |
| DASH COLUMN COVER |
This new billet Aluminum column cover is a
great way to update the column area of the dash. You have two options, one is a
for a 2" aftermarket column and the other is a 2.5" for
a stock type column. These covers are CNC machined and Clear anodized to keep them looking good. The two half's are located with stainless dowel pins to insure you have proper
alignment when installed.


Click for price |
Part Number |
PART |
 |
42-30041 |
ALUMINUM
2" COLUMN COVER (AFTERMARKET COLUMN) |
 |
42-30042 |
ALUMINUM
2.5" COLUMN COVER (STOCK COLUMN) |
|
| |
| DASH COLUMN COVER |
| This column cover is a stock
reproduction plastic cover with the famous Bronco script. This two piece cover
is for the stock type 2.5" column and only comes in black.

Click for price |
Part Number |
PART |
 |
42-30051 |
BRONCO
SCRIPT 2.5"
COLUMN COVER (STOCK COLUMN) |
|
| |
| BILLET WINDSHIELD KNOBS |
| These custom billet aluminum windshield knobs are as functional as they are great looking. They will really dress up the interior of any Early Bronco. Knob handles are CNC machined from aluminum billet then polished and clear coated for lasting great looks. Threaded studs are steel.
Click for price |
Part Number |
PART |
 |
72-51000 |
WINDSHIELD
KNOBS |
|
| |
| NEW HIGH IMPACT PLASTIC GLOVE BOX |
| Now you can get the last glove box you will
ever need for your Bronco. It looks like the original paper glove box, but its
made of high-quality, impact and stress resistant plastic. The glove box comes
with the door hinge and striker plate openings cut out and has 5 blind nuts
so you can just install it with a few screws.


| |
Click for price |
|
PART |
 |
72-00032 |
GLOVE
BOX |

|
72-00034 |
LOCKING GLOVE
BOX DOOR LATCH |
 |
72-00035 |
NON
LOCKING GLOVE
BOX DOOR LATCH |
|
|
|
| |
PLEASE READ THE FOLLOWING
Before ordering products from B.C. Broncos, please read the following information, including warranty information and statement of liability. By placing an order to purchase products from B.C. Broncos, you are confirming that you have read and agree to our warranty and statement of liability.
INTERNET PRODUCT & PRICING POLICY
Due to the constant market changes, prices listed online are subject to change without notice. Additionally, sometimes parts will very from the picture shown due to slight manufacturing changes and or different sources.
WARRANTY POLICY
Within 30 days of receiving a product, if you find the product defective or incorrect, return it to B.C. Broncos. We will repair or replace any product found to be defective, subject to our inspection. Warranty is limited to the cost of the replacement part. Some items purchased from B.C. Broncos and built by other manufacturers may or may not carry warranty's issued by the manufacturer. B.C. Broncos is not a party to such warranty's, and all claims on manufacturer warranty's should be made directly to the manufacturer. No further warranty's are expressed or implied.
RETURNED GOODS POLICY
All items returned to B.C. Broncos which were originally paid for by credit card are subject to a 10% restocking fee.
STATEMENT OF LIMITED LIABILITY
Because B.C. Broncos has no control over the installation and/or other uses of our products, B.C. Broncos will not be held liable for personal, property, legal, or financial damages or claims stemming from the use or misuse of any product we manufacture or sell. The purchaser assumes all responsibility for the safety, proper installation, performance, and applicability of these products. If you have any doubts or concerns about the installation, function, performance or proper use of any of our products, please call our toll free number before proceeding with the installation or use of the product
SHIPPING POLICY
Please note: B.C. Broncos will not pay premium shipping
for any reason. We will ship next day, same day, 3 day or any other
premium shipping method that you like but you will have to pay the cost and
take the risk that it will get to you when you want it and that it is what you
wanted. We will do our best to get what you want to you when you want it. But
premium shipping is extra work for us that we are doing for you as a favor and
we make no money on any shipping and will not refund shipping if things
do not turn out the way you expected.
We hope you find some valuable information on these pages. If you
need more information, give us a call or check back later. We will be updating
often. Input for improvement on this page or our products is always welcome.
|