BC Broncos - Class 3 Racer BC Broncos - Class 3 Racer
Unique upgrades & Performance Mods
BC Broncos - Early Bronco Restoration BC Broncos - Early Bronco Restoration
Classic & Custom Restoration

 

STEERING COLUMNS

 
IDIDIT® TILT STEERING COLUMNS

These great tilt columns from Ididit® are as functional as they are good looking. These columns provide tight, smooth steering as well as convenient 5-position tilt adjustment to suit the preference of any driver and to make entry and exit easier. Also featured are self canceling turn signal switch, 4-way flashers, horn wiring and an billet aluminum knob & shifter kit. Why spend hundreds of dollars and countless hours refurbishing a junkyard tilt column. Columns are available with column shifter for automatic transmissions (shown above ) and without a shifter for Broncos with floor shifters (bottom).

This column uses a strong 1" DD shaft, an industry standard 3-7/8" GM wiring connector. Direct connect to Centech or Painless harnesses accepts '69 or newer GM steering wheel adapters . Column comes in unfinished bare steel--prime and paint it your favorite color.

Part # 42-21100 comes with 42-50031 mounting bracket.

Part # 42-22100 comes with 42-50032 mounting bracket.

 

Raw steering column installed no dash

steering column with indicator

Click for price

Part Number
            Part                   

Buy Now

42-21100
TILT COLUMN STEEL (FLOOR SHIFTER)

Buy Now

42-21200
TILT COLUMN ALUMINUM (FLOOR SHIFTER)

Buy Now

42-22100
TILT COLUMN  STEEL (AUTO SHIFTER)

Buy Now

42-22200
TILT COLUMN ALUMINUM (AUTO SHIFTER)

Buy Now

42-30010
OPTIONAL CHROME OR POWDER COATING

Buy Now

42-30031
WIRING CONNECTOR FEMALE (USUALLY COME ON AN AFTERMARKET HARNESS)

Buy Now

42-30032
WIRING CONNECTOR MALE (COMES ON THE IDIDIT COLUMN)

 

 
AUTO COLUMN GEAR INDICATOR

When using a new aftermarket column with a shifter on the column you need a shift indicator. The columns don't come with one because everyone wants something different so they make them without, depending on the steering wheel you have will allow you to put it so you can see it through the wheel.

 

Aluminum gear indicator gear shift indicator installed

If you want to upgrade to Black, polished aluminum or chrome the price is 62.99

Click for price

Part Number             Part                   

Buy Now

42-41011 COLUMN SHIFT INDICATOR WITH ALUMINUM COVER FOR 3 SPEED

Buy Now

42-41021 COLUMN SHIFT INDICATOR WITH ALUMINUM COVER FOR 4 SPEED

Buy Now

42-41031 COLUMN SHIFT INDICATOR WITH ALUMINUM COVER FOR AOD

Buy Now

42-41041 COLUMN SHIFT INDICATOR WITH ALUMINUM COVER FOR AODE

 

 
DASH COLUMN COVER

This new billet Aluminum column cover is a great way to update the column area of the dash. You have two options one is a for a 2" aftermarket column and the other is a 2.5" for a stock type column. These covers are CNC machined  and Clear anodized to keep them looking good. The two half's are located with stainless dowel pins to insure you have proper alignment when installed.

              

Click for price

Part Number
                   PART            

Buy Now

42-30041
 ALUMINUM 2" COLUMN COVER    (AFTERMARKET COLUMN)

Buy Now

42-30042
  ALUMINUM 2.5" COLUMN COVER    (STOCK COLUMN)

 
DASH COLUMN COVER
This column cover is a stock reproduction plastic cover with the famous Bronco script. This two piece cover is for the stock type 2.5" column and only comes in black.

Click for price

Part Number
                   PART            

Buy Now

42-30051
 BRONCO SCRIPT  2.5" COLUMN COVER    (STOCK COLUMN)

 
COLUMN MOUNT
Made from 1/8 steel, designed to be spot-welded in 4 places once the column is set in a comfortable position for the driver. We also went with the oval holes for stock adjustment.     We have two versions of this bracket the 2" is for the Ididit column for a bronco with a floor shifter. The 2 1/2" mount is for the stock Bronco column and the Ididit auto shift column. Not for Aluminum columns.

 

 

Click for price

Part Number
                   PART            

Buy Now

42-50031
COLUMN MOUNT 2"( IDIDIT FLOOR SHIFT )

Buy Now

42-50032
COLUMN MOUNT 2 1/2"(STOCK OR  IDIDIT AUTO SHIFT )

Buy Now

42-50011
ALUMINUM COLUMN MOUNT 2"( IDIDIT FLOOR SHIFT )

Buy Now

42-50012
ALUMINUM COLUMN MOUNT 2 1/2"(STOCK OR  IDIDIT AUTO SHIFT )
 
 
SHIFT INDICATOR
This indicator will go on any column, excellent when using a custom steering wheel that might obstruct your view on a standard column.
 

Click for price

Part Number
                   PART            

Buy Now

42-41010
3 SPEED

Buy Now

42-41020
4 SPEED

Buy Now

42-41030
OVERDRIVE

 

 

 

 

 

 
WHAT U-JOINT AND SHAFT DO I NEED

When you upgrade to power steering from manual steering you need one or two u-joints to eliminate the bind in your stock column. The early column shaft goes from the nut on the steering wheel to what we call the (bell joint) that slips on the steering box. Because the power steering box is bigger, taller and longer than the stock manual box, you need to relieve the bind on the shaft and that is where the u-joint comes in. We usually cut the stock shaft about 2" after the end of the column tube and grind a "DOUBLE D" into the shaft and mount a u-joint, here you can add the optional lower shaft and lower u-joint to have all new parts from the column to the box.

Here are the two options for lower shafts.

You will need to measure the steering shaft.

You will have one of these as a way to connect the shafts and u-joints to the column and steering box.

   

 

 
LOWER STEERING SHAFT KITS
Tighten up, modernize and make your steering system safer with these steering u-joints and lower steering shafts. Just let us know what column you are using. This will tell us what length shaft and what upper joint you will need, the only other thing we need is the diameter of the shaft on the steering box Works great with our Ididit® tilt steering columns.

Click for price

Part Number               Part                 

Buy Now

43-00110 LOWER STEERING SHAFT KIT 14" SHAFT  (USED WITH STOCK COLUMN)

Buy Now

43-00210 LOWER STEERING SHAFT KIT 16" SHAFT (USED WITH IDIDIT AUTO)

Buy Now

43-00310 LOWER STEERING SHAFT KIT 18" SHAFT  (USED WITH IDIDIT MANUAL)

Buy Now

43-00410 LOWER STEERING SHAFT KIT WITH SAFETY SHAFT

Buy Now

43-00510 LOWER STEERING SHAFT KIT WITH TELESCOPING SHAFT

 

 
LOWER STEERING SHAFT
Tighten up, modernize and make your steering system safer with these lower steering shafts. Replace just the stock rag joint or the entire lower shaft assembly. Works great with our Ididit® tilt steering columns.

 

  

Click for price

Part Number               Part                 

Buy Now

43-00600

 12" 3/4X3/4X36 SPLINE SHAFT

Buy Now

43-00100

 14" 3/4X3/4X36 SPLINE SHAFT

Buy Now

43-00200

 16" 3/4X3/4X36 SPLINE SHAFT

Buy Now

43-00300

 18" 3/4X3/4X36 SPLINE SHAFT

Buy Now

43-00400

 SAFETY SHAFT

Buy Now

43-00500

 TELESCOPING SHAFT

 
 
BORGESON U-JOINTS
As you can see in the drawings below there are many ways to setup your linkage from the column to the steering box. The most common setup for the Bronco is like the first picture you see, and is the most cost effective.

 

35* Is the maximum you can flex the steering u-joint without damaging it.

This figure shows how far the shaft goes in the u-joint, Good to know when measuring how long the new shaft needs to be.

Here is the proper way to mount the u-joints on the shaft.

Click for price

Part Number               Part                 

Buy Now

45-10010 U-JOINT 3/4-36 X 3/4-36

Buy Now

45-10020 U-JOINT 3/4-36 X 13/16-36

Buy Now

45-10040 U-JOINT 3/4-36 X 11/16-36

Buy Now

45-10050 U-JOINT 3/4-36 X 17MM

Buy Now

45-20040 U-JOINT 3/4-DD X 1-DD

Buy Now

45-20010 U-JOINT 3/4-DD X 3/4-36

Buy Now

45-20020 U-JOINT 3/4-DD X 3/4-DD

Buy Now

45-20030 U-JOINT 3/4-DD X 13/16-36

Buy Now

45-30010 U-JOINT 3/4-SMOOTH X 3/4-36

Buy Now

45-30020 U-JOINT 3/4-SMOOTH X 3/4-DD

Buy Now

45-30030 U-JOINT 3/4- SMOOTH X 1-DD

Buy Now

45-30040 U-JOINT 3/4-SMOOTH X 13/16-36

Buy Now

45-10030 U-JOINT 1-DD 3/4-36

Buy Now

45-40030 U-JOINT 1-DD 13/16-36

Buy Now

45-40040 U-JOINT 1-DD X 1-DD

 

 
RAG JOINT
The rag joint is a way to keep road vibrations and driver fatigue to a minimum by having a rubber pad between the lower shaft and the steering wheel.

 

 

Click for price

Part Number
                   PART            

Buy Now

45-40111
RAG JOINT  1DD X 3/4 DD

Buy Now

45-40011
RAG JOINT  1DD X 3/4-36

 

 

 

 

 


BC Broncos -110 Business Drive / PO BOX 69 Ingram, TX 78025
Tech line: (830) 367-1300 Order line: (888) 304-2945 <Fax: (830) 367-1304


PLEASE READ THE FOLLOWING

Before ordering products from B.C. Broncos, please read the following information, including warranty information and statement of liability. By placing an order to purchase products from B.C. Broncos, you are confirming that you have read and agree to our warranty and statement of liability.

INTERNET PRODUCT & PRICING POLICY
Due to the constant market changes, prices listed online are subject to change without notice. Additionally, sometimes parts will very from the picture shown due to slight manufacturing changes and or different sources.

WARRANTY POLICY
Within 30 days of receiving a product, if you find the product defective or incorrect, return it to B.C. Broncos. We will repair or replace any product found to be defective, subject to our inspection. Warranty is limited to the cost of the replacement part. Some items purchased from B.C. Broncos and built by other manufacturers may or may not carry warranty's issued by the manufacturer. B.C. Broncos is not a party to such warranty's, and all claims on manufacturer warranty's should be made directly to the manufacturer. No further warranty's are expressed or implied.

RETURNED GOODS POLICY
All items returned to B.C. Broncos which were originally paid for by credit card are subject to a 10% restocking fee.

STATEMENT OF LIMITED LIABILITY
Because B.C. Broncos has no control over the installation and/or other uses of our products, B.C. Broncos will not be held liable for personal, property, legal, or financial damages or claims stemming from the use or misuse of any product we manufacture or sell. The purchaser assumes all responsibility for the safety, proper installation, performance, and applicability of these products. If you have any doubts or concerns about the installation, function, performance or proper use of any of our products, please call our toll free number before proceeding with the installation or use of the product

SHIPPING POLICY
Please note: B.C. Broncos will not pay premium shipping for any reason. We will ship next day, same day, 3 day or any other premium shipping method that you like but you will have to pay the cost and take the risk that it will get to you when you want it and that it is what you wanted. We will do our best to get what you want to you when you want it. But premium shipping is extra work for us that we are doing for you as a favor and we make no money on any shipping and will not  refund shipping if things do not turn out the way you expected.

We hope you find some valuable information on these pages. If you need more information, give us a call or check back later. We will be updating often. Input for improvement on this page or our products is always welcome.