BC Broncos - Class 3 Racer BC Broncos - Class 3 Racer
Unique upgrades & Performance Mods
BC Broncos - Early Bronco Restoration BC Broncos - Early Bronco Restoration
Classic & Custom Restoration

 
BAGS AND MOUNTS
 
TOOL ROLL

Often when your miles from nowhere, you need to count on yourself. You need to have all the tools with you that you can bring. This tool roll has 23 different size pockets so it will hold lots of wrenches or screw drivers and it even has a zippered pocket. With the tools in the picture this tool roll is no more than 2" in diameter. Made of high quality nylon it features a rubber handle to tote that bag around and Buckle strap's, No hard to tie knots. Open it measures 14.5" x 30.5" and it's Made in the USA. Tools sold separately

Click for price

Part Number

PART                       

buy now

92-10010

BLACK TOOL ROLL

 

 
FOLDING TOOL BAG

This is a great way to organize your tool bag, no more dumping out your tool bag to find that small tool at the bottom. It has 9 pockets and a large zippered pouch yet folds up small enough to keep in your main tool bag.

Click for price

Part Number           PART                       

buy now

92-10020

BLACK

 

 
TRI-FOLD TOOLBAR

This little bag is about the size of a shaving kit, it folds out into three sections and has four separate zippered pockets and a carrying handle it measures about 12" X 18" X 3"

Tools not included

Click for price

Part Number           PART                       

buy now

92-10030

BLACK

 

 
DELUXE TRAIL BAG

What better way to hold tools, maps , spare parts or other necessities than a hand made tool bag by Beard Seats? Strong vinyl construction is combined with heavy-duty stitching large full-strength zippers and rubberized carrying handle to survive the harshest conditions. This bag also comes with mounting straps that bolt to the body with footman loops and then the Velcro straps slip through the straps on the bag.
Available in black, blue and red.

Click for price

Part Number           PART                       

buy now

92-10042 BLACK

 

 
TOOL TRAY

Are you tired of your tools and supplies getting lost or messed up because they slide around the back of your Bronco. Here is a great way to keep that from happening. These tool trays bolt in and hold lots of stuff from tool bags to drive shafts and tow straps. Chuck keeps a drive shaft on one side and a tool bag and roll of carpet in the other.

Click for price

Part Number

PART                       

buy now

75-00071

TOOL TRAY

buy now

75-00070

TOOL TRAY PAIR

 

 
ANTENNA MOUNT

Are you looking for a good place to mount your CB antenna well now all you need is a little bit of round tubing like a roll cage a tube bumper a ice chest or roof rack. We have many different mounting rings that can be used on 1" to 2.5"  tube

Antenna not included

All Fourtreks Modular Mounting components are precision-machined from T-6061 aluminum for light weight yet high strength. The system is made up of two basic components; a clamp ring and an adapter. The clamp ring is precisely machined to clamp around your exact roll bar diameter. They manufacture clamp rings for 1", 1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll bars. The two-piece clamp ring bolts around your roll bar using stainless steel hardware. The second component is the adapter. The adapter bolts onto either side of the clamp ring allowing two adapters to be mounted to the same clamp ring, if desired. The adapters are designed to hold a Four Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks, fire extinguishers, cameras, camcorders roof racks load bars and grab bar handles for your passengers.  Fourtreks offers all of the adapters in a kit form with clamp rings or individual components so that you can mix and match your own systems. When ordering please let us know what size bar you will mount it to.

Click for price

Part Number

PART                       

buy now

91-50110

ANTENNA MOUNT

 

 
CAMCORDER MOUNT

If you are like us you want to record some of your Bronco trips it is fun to get good footage of 4 wheeling to watch when it is too cold to go wheeling. Just bolt this mount to any 1"to 2.5" tube and hit record. this is a good solid mount to put keep your camera on and with a handle you can swivel your camera to get good shots of the trail.

Camera not included

All Fourtreks Modular Mounting components are precision-machined from T-6061 aluminum for light weight yet high strength. The system is made up of two basic components; a clamp ring and an adapter. The clamp ring is precisely machined to clamp around your exact roll bar diameter. They manufacture clamp rings for 1", 1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll bars. The two-piece clamp ring bolts around your roll bar using stainless steel hardware. The second component is the adapter. The adapter bolts onto either side of the clamp ring allowing two adapters to be mounted to the same clamp ring, if desired. The adapters are designed to hold a Four Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks, fire extinguishers, cameras, camcorders roof racks load bars and grab bar handles for your passengers.  Fourtreks offers all of the adapters in a kit form with clamp rings or individual components so that you can mix and match your own systems. When ordering please let us know what size bar you will mount it to.

Click for price

Part Number

PART                       

buy now

91-50120

CAMCORDER MOUNT

 

 
FIRE EXTINGUISHER MOUNT

Your looking for a way to mount that fire extinguisher in your vehicle.  Don't use hose clamps to fix it to the roll bar!  Hose clamps belong on your radiator hoses under the hood.  Instead, use our Modular Fire Extinguisher Mount.  Fully cnc machined from 6061-T6 billet aluminum for a perfect fit.  This kit comes with a fire extinguisher adapter bar and modular clamp ring.  Stainless steel hardware included.  Available for many popular roll bar diameters.

 This mount can easily support the weight of a 3.5 lbs fire extinguisher.  Designed to fit a wide variety of fire extinguishers and their mounting brackets.  

 Fire Extinguisher not included

All Fourtreks Modular Mounting components are precision-machined from T-6061 aluminum for light weight yet high strength. The system is made up of two basic components; a clamp ring and an adapter. The clamp ring is precisely machined to clamp around your exact roll bar diameter. They manufacture clamp rings for 1", 1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll bars. The two-piece clamp ring bolts around your roll bar using stainless steel hardware. The second component is the adapter. The adapter bolts onto either side of the clamp ring allowing two adapters to be mounted to the same clamp ring, if desired. The adapters are designed to hold a Four Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks, fire extinguishers, cameras, camcorders roof racks load bars and grab bar handles for your passengers.  Fourtreks offers all of the adapters in a kit form with clamp rings or individual components so that you can mix and match your own systems. When ordering please let us know what size bar you will mount it to.

Click for price

Part Number

PART                       

buy now

91-50130

FIRE EXTINGUISHER MOUNT

 

 
GPS MOUNT

You spent the money for your global positioning system (GPS) and now your looking for way to mount it in your four wheel drive, sand car or desert race vehicle.  Mount it on the roll cage using our Modular GPS Mount!  This mount is perfect for mounting your unit to the dash bar tubing of your roll cage.  It bolts directly to the bracket that comes with your GPS unit.  The system comes with a billet aluminum GPS adapter bar, stainless steel hardware and billet aluminum modular clamp ring of your choice. 

GPS not included

All Fourtreks Modular Mounting components are precision-machined from T-6061 aluminum for light weight yet high strength. The system is made up of two basic components; a clamp ring and an adapter. The clamp ring is precisely machined to clamp around your exact roll bar diameter. They manufacture clamp rings for 1", 1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll bars. The two-piece clamp ring bolts around your roll bar using stainless steel hardware. The second component is the adapter. The adapter bolts onto either side of the clamp ring allowing two adapters to be mounted to the same clamp ring, if desired. The adapters are designed to hold a Four Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks, fire extinguishers, cameras, camcorders roof racks load bars and grab bar handles for your passengers.  Fourtreks offers all of the adapters in a kit form with clamp rings or individual components so that you can mix and match your own systems. When ordering please let us know what size bar you will mount it to.

Click for price

Part Number

PART                       

buy now

91-50140

GPS MOUNT

 

 
MAGLIGHT MOUNT

Need a place to mount that Maglite that keeps rolling around in the bottom of your four wheel drive?  Mount it on the roll bar with our new Modular Maglite Mounts.  Can be used on horizontal, angled or vertical tube of your roll cage.  These mounts feature a 0.250" Delrin tipped spring ball detent plunger that holds the flashlight firmly in the mount when it is snapped into place.  Just pull it out to retrieve and pop it back in place to store your flashlight.  Delrin detent plungers hold flashlight in the mounts with 20lbs of force per side.  All billet aluminum parts and stainless steel hardware included.  This new Fourtreks option is available for many popular roll bar diameters. These mounts work with all length "D" size battery Maglites!

Maglite shown not included.

All Fourtreks Modular Mounting components are precision-machined from T-6061 aluminum for light weight yet high strength. The system is made up of two basic components; a clamp ring and an adapter. The clamp ring is precisely machined to clamp around your exact roll bar diameter. They manufacture clamp rings for 1", 1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll bars. The two-piece clamp ring bolts around your roll bar using stainless steel hardware. The second component is the adapter. The adapter bolts onto either side of the clamp ring allowing two adapters to be mounted to the same clamp ring, if desired. The adapters are designed to hold a Four Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks, fire extinguishers, cameras, camcorders roof racks load bars and grab bar handles for your passengers.  Fourtreks offers all of the adapters in a kit form with clamp rings or individual components so that you can mix and match your own systems. When ordering please let us know what size bar you will mount it to.

Click for price

Part Number

PART                       

buy now

91-50150

FLASHLIGHT MOUNT

 

 
HIGH LIFT JACK MOUNT

Here is the solution to the never-ending quest for a good, solid and convenient place to mount the four wheeler's best friend - the Hi-lift jack.  Mount it on your roll cage, roof rack or bumper!  Our Billet Aluminum mounts allow you to mount your Hi-lift securely on to your tube in the area of your choice. These mounts can be ordered with stainless steel wing nuts and hardware or our self sealing aluminum wing nuts.  The billet aluminum wing nut option will seal the threads to keep dirt and grime off of the studs your jack beam sits on.  Available for a wide range of tubing diameter applications.  See pull down menu for our extensive sizing options. Each kit includes (2) mounts and all of the necessary stainless steel hardware.

High lift jack not included

All Fourtreks Modular Mounting components are precision-machined from T-6061 aluminum for light weight yet high strength. The system is made up of two basic components; a clamp ring and an adapter. The clamp ring is precisely machined to clamp around your exact roll bar diameter. They manufacture clamp rings for 1", 1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll bars. The two-piece clamp ring bolts around your roll bar using stainless steel hardware. The second component is the adapter. The adapter bolts onto either side of the clamp ring allowing two adapters to be mounted to the same clamp ring, if desired. The adapters are designed to hold a Four Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks, fire extinguishers, cameras, camcorders roof racks load bars and grab bar handles for your passengers.  Fourtreks offers all of the adapters in a kit form with clamp rings or individual components so that you can mix and match your own systems. When ordering please let us know what size bar you will mount it to.

Click for price

Part Number

PART                       

buy now

91-50172

HIGH LIFT JACK MOUNT WITH STAINLESS STEEL MOUNTING HARDWARE

buy now

91-50171

HIGH LIFT JACK MOUNT WITH ALUMINUM MOUNTING HARDWARE

 

 
SHOVEL MOUNT

Need a place to mount that shovel?  Mount it on the roll cage or roof rack with our Modular Shovel Mounts!  These mounts feature a rubber clamp that is not affected by cold or hot climates and is UV resistant for long life.  Combined with our billet aluminum clamp rings and adapters makes for a complete kit to mount your shovel.  All hardware is stainless steel.  This new Fourtreks product is available for many popular tubing diameters.  Check out our pull down menu for extensive sizing options. This kit comes with (2) mounts.  Each mount can support up to 22lbs.  These mounts can hold objects from 1" to 2-1/2" in diameter.  Can be used with axes, hoses, rifles, shotguns, fishing gear and various other tools.  Just use your imagination.

Shovel not included

All Fourtreks Modular Mounting components are precision-machined from T-6061 aluminum for light weight yet high strength. The system is made up of two basic components; a clamp ring and an adapter. The clamp ring is precisely machined to clamp around your exact roll bar diameter. They manufacture clamp rings for 1", 1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll bars. The two-piece clamp ring bolts around your roll bar using stainless steel hardware. The second component is the adapter. The adapter bolts onto either side of the clamp ring allowing two adapters to be mounted to the same clamp ring, if desired. The adapters are designed to hold a Four Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks, fire extinguishers, cameras, camcorders roof racks load bars and grab bar handles for your passengers.  Fourtreks offers all of the adapters in a kit form with clamp rings or individual components so that you can mix and match your own systems. When ordering please let us know what size bar you will mount it to.

Click for price

Part Number

PART                       

buy now

91-50160

SHOVEL MOUNT

 

 
GRAB HANDLE

These custom Modular Aluminum Handles are fully machined from billet 6061-T6 and are rock solid!  You get your choice of a 6" or 12" length black anodized rod.  Rod diameter is 1".  These handles can be used on a wide range of roll bar diameters. All stainless steel hardware included.

All Fourtreks Modular Mounting components are precision-machined from T-6061 aluminum for light weight yet high strength. The system is made up of two basic components; a clamp ring and an adapter. The clamp ring is precisely machined to clamp around your exact roll bar diameter. They manufacture clamp rings for 1", 1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll bars. The two-piece clamp ring bolts around your roll bar using stainless steel hardware. The second component is the adapter. The adapter bolts onto either side of the clamp ring allowing two adapters to be mounted to the same clamp ring, if desired. The adapters are designed to hold a Four Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks, fire extinguishers, cameras, camcorders roof racks load bars and grab bar handles for your passengers.  Fourtreks offers all of the adapters in a kit form with clamp rings or individual components so that you can mix and match your own systems. When ordering please let us know what size bar you will mount it to.

Click for price

Part Number

PART                       

buy now

91-50180

GRAB HANDLE

 

 
DUAL TOOL MOUNT

This kit comes with (2) mounts.  Each mount can support up to 44lbs.  The rubber clamps can hold objects ranging is sizes from 1" to 2-1/2" in diameter.  Can be used with axes hoses, rifles, shotguns, fishing gear and various other tools.  Just use your imagination!

Shovel and axe shown not included.

All Fourtreks Modular Mounting components are precision-machined from T-6061 aluminum for light weight yet high strength. The system is made up of two basic components; a clamp ring and an adapter. The clamp ring is precisely machined to clamp around your exact roll bar diameter. They manufacture clamp rings for 1", 1-1/8", 1-1/4", 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2” and 2-1/4” diameter roll bars. The two-piece clamp ring bolts around your roll bar using stainless steel hardware. The second component is the adapter. The adapter bolts onto either side of the clamp ring allowing two adapters to be mounted to the same clamp ring, if desired. The adapters are designed to hold a Four Wheeler’s most favorite items. Adapters are available for: Hi-lift jacks, fire extinguishers, cameras, camcorders roof racks load bars and grab bar handles for your passengers.  Fourtreks offers all of the adapters in a kit form with clamp rings or individual components so that you can mix and match your own systems. When ordering please let us know what size bar you will mount it to.

Click for price

Part Number

PART                       

buy now

91-50190

DUAL TOOL MOUNT

 

 
ALUMINUM POWER TANK BRACKET

The new Super Bracket is smaller than the Power Bracket which allows it to be mounted in tighter locations in a vehicle or trailer. This bracket holds both the 10 lb. and the 15 lb. And, unlike our Power Brackets, there is no drilling required if used with our aluminum roll bar clamps. Very clean.

Click for price

Part Number

PART                       

buy now

91-22411

SUPER BRACKET 5 Lbs. POWERTANK 

buy now

91-22412

SUPER BRACKET 10 and 15 Lbs. POWERTANK 

 

 
POWERTANK ROLL BAR MOUNTS

With our mounting brackets these ABC (Aluminum Billet Clamp) Clamps make mounting your Power Tank easy and clean. The compact design allows it to fit between the roll bar and the inside of the rig. The Allen socket button head bolts are nothing less than stainless steel. Sold in pairs. Fits tubing diameters: 1.50", 1.75", 2.00",& 2.25"

Click for price

Part Number

PART                       

buy now

91-22441

 RED MOUNT

buy now

91-22442

  BLACK MOUNT

 

 
POWERTANK ROLL BAR MOUNTS

 These mounts are made up of two tube clamps and two CO2 tank adapter bars along with all the necessary hardware.    They are designed to be used with the mounting bracket that comes with your CO2 air system like the one above. These mounts will allow you to mount your tank securely in your vehicle and fits tubing diameters 1” through 2 3/8”.

fourtreks co2 tank mount

 

 
 


BC Broncos -110 Business Drive / PO BOX 69 Ingram, TX 78025
Tech line: (830) 367-1300 Order line: (888) 304-2945 <Fax: (830) 367-1304


PLEASE READ THE FOLLOWING

Before ordering products from B.C. Broncos, please read the following information, including warranty information and statement of liability. By placing an order to purchase products from B.C. Broncos, you are confirming that you have read and agree to our warranty and statement of liability.

INTERNET PRODUCT & PRICING POLICY
Due to the constant market changes, prices listed online are subject to change without notice. Additionally, sometimes parts will very from the picture shown due to slight manufacturing changes and or different sources.

WARRANTY POLICY
Within 30 days of receiving a product, if you find the product defective or incorrect, return it to B.C. Broncos. We will repair or replace any product found to be defective, subject to our inspection. Warranty is limited to the cost of the replacement part. Some items purchased from B.C. Broncos and built by other manufacturers may or may not carry warranty's issued by the manufacturer. B.C. Broncos is not a party to such warranty's, and all claims on manufacturer warranty's should be made directly to the manufacturer. No further warranty's are expressed or implied.

RETURNED GOODS POLICY
All items returned to B.C. Broncos which were originally paid for by credit card are subject to a 10% restocking fee.

STATEMENT OF LIMITED LIABILITY
Because B.C. Broncos has no control over the installation and/or other uses of our products, B.C. Broncos will not be held liable for personal, property, legal, or financial damages or claims stemming from the use or misuse of any product we manufacture or sell. The purchaser assumes all responsibility for the safety, proper installation, performance, and applicability of these products. If you have any doubts or concerns about the installation, function, performance or proper use of any of our products, please call our toll free number before proceeding with the installation or use of the product

SHIPPING POLICY
Please note: B.C. Broncos will not pay premium shipping for any reason. We will ship next day, same day, 3 day or any other premium shipping method that you like but you will have to pay the cost and take the risk that it will get to you when you want it and that it is what you wanted. We will do our best to get what you want to you when you want it. But premium shipping is extra work for us that we are doing for you as a favor and we make no money on any shipping and will not  refund shipping if things do not turn out the way you expected.

We hope you find some valuable information on these pages. If you need more information, give us a call or check back later. We will be updating often. Input for improvement on this page or our products is always welcome.