|
|
| TRAIL GEAR |
| POWER TANK 10lb | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The Power Tank is a product that addresses all the needs of
on-board air without the expense and hassle of an on-board compressor. It
consists of an aluminum cylinder of pressurized liquid CO2 which is released
as a vapor through a special heavy duty regulator. The regulator was
designed specially for this type of use. The Power Tank can air up tires,
run air tools, etc., while out on the trail, the race course, the side of
the road, or even in your garage. It is fast, affordable, and simple to use.
It is light weight, portable, and reliable and it is THE fastest way to air
up tires.
3 main points THE HPX SUPERFLOW REGULATOR: Is so fast you can actually reseat tires on the rim, Some of the features include:
The Power Tank has the power and speed of a belt driven (A/C) compressor and the portability and lower cost of some 12 volt compressors. The Power Tank can air up a 33" truck tire in less than one minute, remove a stuck lug nut in two seconds using a 1/2" impact wrench, and quickly reseat a tire while the wheel is still on the vehicle. And portability is a must when you need to help a friend who is difficult to get to. No other air system can do all of this - at any price. There are many configurations and options for purchasing the Power Tank. We offer the cylinders by themselves, and all of the components separately, but its a much better value to choose from one of our complete systems: Basic Power Tank Systems include the following:
With one of the dual tank Ultimate Power Systems you'll never have to worry whether you have enough CO2 because with an extra tank, you will always have at least one full tank on hand. As soon as one goes empty you can swap in the spare tank and get the other refilled later. The Ultimate Power Systems come with everything included in the Basic Power Tank Systems, along with the additional tank. The SuperFlow Regulator Kit (SFRK-01) gives you the awesome on-board air capabilities of the regular Power Tank at a more affordable price. This kit includes the Super Flow regulator, the valve guard/handle, and the DuraThane coil hose kit. You supply your own CO2 tank.
PT10-5240 (BU, BK, YL, P)
PT10-5250 (BU, BK, YL, CB, P) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| POWER TANK 15lb | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The Power Tank is a product that addresses all the needs of on-board air
without the expense and hassle of an on-board compressor. It consists of an
aluminum cylinder of pressurized liquid CO2 which is released as a vapor
through a special heavy duty regulator. The regulator was designed specially for this type of use. The Power Tank can air up tires, run air
tools, etc., while out on the trail, the race course, the side of the road,
or even in your garage. It is fast, affordable, and simple to use. It is
light weight, portable, and reliable and it is THE fastest way to air up
tires.
3 main points THE HPX SUPERFLOW REGULATOR: Is so fast you can actually reseat tires on the rim, Some of the features include:
The Power Tank has the power and speed of a belt driven (A/C) compressor and the portability and lower cost of some 12 volt compressors. The Power Tank can air up a 33" truck tire in less than one minute, remove a stuck lug nut in two seconds using a 1/2" impact wrench, and quickly reseat a tire while the wheel is still on the vehicle. And portability is a must when you need to help a friend who is difficult to get to. No other air system can do all of this - at any price. There are many configurations and options for purchasing the Power Tank. We offer the cylinders by themselves, and all of the components separately, but its a much better value to choose from one of our complete systems: Basic Power Tank Systems include the following:
With one of the dual tank Ultimate Power Systems you'll never have to worry whether you have enough CO2 because with an extra tank, you will always have at least one full tank on hand. As soon as one goes empty you can swap in the spare tank and get the other refilled later. The Ultimate Power Systems come with everything included in the Basic Power Tank Systems, along with the additional tank. The SuperFlow Regulator Kit (SFRK-01) gives you the awesome on-board air capabilities of the regular Power Tank at a more affordable price. This kit includes the Super Flow regulator, the valve guard/handle, and the DuraThane coil hose kit. You supply your own CO2 tank.
PT10-5240 (BU, BK, YL, P)
PT10-5250 (BU, BK, YL, CB, P)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MONSTER VALVE AND PRESSURE GAUGE KIT | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MONSTER VALVE KIT | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TRAILHEAD TIRE DEFLATORS | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
When you need to Air Down, just screw on these new deflators (like a valve cap) and all four tires will rapidly and automatically air down to your pre-selected pressure, while you are happily proceeding on down the trail.
Tire deflators will reduce the air pressure in a tire to a predetermined level and then stop, preventing any further loss of air from the tire. They will function properly whether your vehicle is stationary or traveling at speeds up to 20 MPH. Check out these features:
AND they will not leave you flat!
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TIRE REPAIR KIT | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
JP Magazine says, "...one of the nicest and most complete repair kits we've come across". All off road rigs should have a good tire repair kit. The problem is that there are none that are complete. So we designed our own tire repair kit using the best quality tire repair parts in the industry. First we started with aluminum handle tools for lightweight and strength. The needle and reamer are guaranteed never to bend or break. Next we added (30) self-vulcanizing BLACK plugs, two large patches in case of a thread cut that won't hold plugs, 24" of stainless steel wire in case you have to sew a major side wall cut, and a jar of lube to make the job easier, two knives to cut the plug ends, a 4-in-1 valve core tool, and allens for the tools. All in a high impact storage box. Don't buy a kit that is incomplete or includes cheap, useless stuff.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SHOCK INFLATOR WITH GAUGE - 500 PSI | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Here's an affordable and easy to use shock inflator. The built in valve allows you to control the flow. The braided high pressure air line is supple allowing it snake around tubes and body parts to access the chuck onto the shock valve. The special "No Air Loss" chuck ensures that an accurate fill stays accurate....
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| POWERTANK ROLL BAR MOUNTS | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
With our mounting brackets these ABC (Aluminum Billet Clamp) Clamps make mounting your Power Tank easy and clean. The compact design allows it to fit between the roll bar and the inside of the rig. The Allen socket button head bolts are nothing less than stainless steel. Sold in pairs. Fits tubing diameters: 1.50", 1.75", 2.00",& 2.25" We have found another cool use for these clamps we also use these clamps to mount our cooling pipes that go from the front of the Bronco to the back where the radiator is.
WHEN ORDERING SPECIFY ROLL BAR SIZE
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ALUMINUM POWER TANK BRACKET | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The new Super Bracket is smaller than the Power Bracket which allows it to be mounted in tighter locations in a vehicle or trailer. This bracket holds both the 10 lb. and the 15 lb. And, unlike our Power Brackets, there is no drilling required if used with our aluminum roll bar clamps. Very clean.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PLUG IN VOLT GAUGE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| This is a cool way to see what
the charging system on car is doing without even opening the hood as long as
you have a cigarette lighter it will give you the amount of volts.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SUPER STRAP | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The SUPER STRAP is not your ordinary recovery strap. The unique construction allows you to weave a strong loop at each end in seconds. You can easily attach it around anything and make it the perfect desired length. The pulling action makes it a non-slip grip. Easily unweave it and store when you are done. This is the smartest strap you will ever own. The SUPER STRAP features 8,500 lb. woven strength, 10,000 lb. capacity webbing, and comes in 15' - 20' - 25' -50' lengths. Now available the 2" Big Daddy - 20,000 lb. Capacity Material - 2" Unique Nylon Weave Available Lengths: 20', 25', 30', 50'
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| HIGH LIFT JACK HANDLE ISOLATOR | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
This isolator will help you stay sane when driving down ruff dirt road, this will help keep the rattling down to a minum while safely keeping the handle secure.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| RECEIVER SHACKLE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
This is a great tool to have, making it easy to hook up a chain or cable to pull someone out or to tie your Bronco down when you are ready to get back home.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MILE MARKER 9,500 Lb WINCH | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MILE MARKER 12,000 Lb WINCH | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LIGHTFORCE ENFORCER HANDHELD SPOT LIGHT | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
170mm battery powered spot light
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| U-JOINT SAVER | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The U-joint saver keeps the caps on your u-joint. It prevents you from loosing a u-joint cup when you go to install a drive shaft at home It comes in really handy on your spare drive shaft, it really sucks when you go and get your spare drive shaft and a u-joint cap is missing or it is laying there but missing some of the bearings. This is the best tool for the money, it will save you so much aggravation and TIME.
|
All words, graphics, images and code © 2000-2008 B.C. Broncos. All rights reserved. Please do not copy any element of this website without permission. PLEASE READ THE FOLLOWING Before ordering products from B.C. Broncos, please read the following information, including warranty information and statement of liability. By placing an order to purchase products from B.C. Broncos, you are confirming that you have read and agree to our warranty and statement of liability.
WARRANTY POLICY
RETURNED GOODS POLICY
STATEMENT OF LIMITED LIABILITY
|
All words, graphics, images and code © 2000-2008 B.C. Broncos. All rights reserved. Please do not copy any element of this website without permission. |